Associated 1/10 DR10 2WD Drag Race Car Brushless RTR (No Battery or Charger)-Purple

Associated 1/10 DR10 2WD Drag Race Car Brushless RTR (No Battery or Charger)-Purple


1 in stock (can be backordered)



Street Racing — An unsanctioned form of auto racing which occurs on public roads. Racing in the streets is centuries old and started well before the automobile, but auto racing started the moment the second vehicle was created!

Modern street racing’s roots go back to Woodward Avenue, Michigan in the 1960s when the three main Detroit-based American car companies were producing high-powered performance cars. A private racing venue was not always available, and therefore the race would be held illegally on public roads.

The DR10 Drag Race Car is based on the 9-time R.O.A.R. Short Course National Championship winning trucks. The DR10 features a water-resistant high-power Reedy brushless speed control and 3300kV brushless motor, a 2.4GHz 2-channel radio system, as well as our ALL NEW DVC (Dynamic Vehicle Control) receiver unit with built-in adjustable digital gyro. Add to that a Reedy metal-gear, digital, high-torque servo and a water-resistant enclosed receiver box.


  • Based on the 9-time R.O.A.R. National Champion short-course race truck platform
  • 2.4GHz 2-channel radio with new DVC (Dynamic Vehicle Control) receiver featuring built-in adjustable gyro
  • Three-position wheelie bar with optional large wheels
  • High-torque, metal-gear Reedy servo with spring style servo saver
  • Powerful Reedy 3300kV brushless motor
  • Reedy 3300kV brushless motor
  • Lightweight front drag tires
  • Durable and lightweight aluminum top shaft
  • Low center-of-gravity molded composite chassis with hook-and-loop battery straps that accommodate both NiMH and 2/3S LiPo battery packs
  • Metric hardware throughout
  • 18 precision, rubber-sealed ball bearings
  • Durable front and rear wide body mounts
  • 2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable slipper clutch
  • Adjustable suspension geometry
  • Vertical ball ends for roll center adjustments, front and rear
  • Many Factory Team options already available!


  • Approximate Assembly Time: No assembly required
  • Ball Bearings: 18 precision, rubber-sealed ball bearings
  • Batteries: 2S-3S LiPo (sold separately)
  • Charger: LiPo compatible (sold separately)
  • Chassis: Low center-of-gravity molded composite
  • Completion Level: Ready-To-Run
  • Drivetrain: RWD
  • Internal Gear Ratio: 2.6:1
  • Length: 24″ (609.6mm)
  • Motor Type: 3300kV brushless motor
  • Radio: 2.4GHz 2-channel radio system with DVC (Dynamic Vehicle Control) receiver and gyro
  • Scale: 1/10
  • Servos: High-torque, metal-gear Reedy servo with spring style servo saver
  • Shock Type: Aluminum 12mm big bore coil-over
  • Suspension: Adjustable suspension geometry
  • Tire Tread: Slick/Drag Tires
  • Vehicle Type: Drag Racing Car
  • Water-Resistant: Yes
  • Weight: 4.08 lbs (1850g)
  • Wheelbase: 12.68″ (322mm)
  • Width: 10.7″ (272mm)


  • (1) DR10 Drag Race Car RTR
  • (1) 2.4GHz 2-channel radio
  • (1) High-torque, metal-gear Reedy servo
  • (1) Reedy Brushless Speed Control
  • (1) Product Manual


  • Four (4) AA batteries (#ASC302 Reedy AA Alkaline) used in the transmitter
  • NiMH or LiPo battery with High Current T-Plug (#ASC724 Reedy 7-cell WolfPack or #ASC751 Reedy WolfPack LiPo)
  • Charger for battery used (#ASC27201 Reedy balance Charger – good for LiPo, LiFe)

Additional information

Weight 5 lbs
Dimensions 600 × 600 × 600 in


There are no reviews yet.

Be the first to review “Associated 1/10 DR10 2WD Drag Race Car Brushless RTR (No Battery or Charger)-Purple”

Your email address will not be published. Required fields are marked *