RC4WD Gelande II RTR Truck Kit w/Cruiser Body Set

RC4WD Gelande II RTR Truck Kit w/Cruiser Body Set


2 in stock (can be backordered)

SKU: Z-RTR0029 Categories: , , ,


This is the RC4WD 1/10 scale Electric Powered, Radio Controlled,
Ready to Run Gelande II Truck with the Cruiser Body Set.

RTR Gelande II Truck with Cruiser Body, Body Trim, Interior, 3-ch
2.4GHz Radio, Outcry ESC, 45T Motor, Tires, Wheels, Decals,
Instruction Manual


AA Batteries: Eight for transmitter
Battery: 6-cell NiMH or 2S LiPo
Battery Charger: To match selected battery
Building and track equipment


Wheelbase: 10.8″ (275mm)
Length: 18.3″ (466mm)
Width: 8.5″ (216mm)
Height: 10.6″ (270mm)
Ground Clearance: 2.3″ (58mm)
Final Drive Ratio: 31.9:1
Weight: 8.02lbs / 3.64kg
Length: 16.7″ (425mm)
Width: 8.5″ (218mm)
Height: 7.2″ (183mm)
Weight: 42.4oz (1077g)


Transmission and axles are preassembled, and the manufacturer does
not state the size of ball bearings used in each component.

Additional information

Weight 3.64 kg
Dimensions 18.3 × 8.5 × 10.6 mm



Chassis: Machined billet aluminum ladder frame, steering servo mount
on chassis
Drive: Four wheel, plastic shaft for wide driveline angles and
durability, steel universals, center mounted 4×4 transfer case
Axles: Cast Yota II Ratio: 15/40 = 2.67:1, width at hex 7.1″
(180.5mm), 8° round knuckles, removable diff covers, lower mounting
Transmision: R3 Single speed, wide 32P steel gears, with slipper
clutch, 14/64 = 4.57:1 internal ratio 1.78:1
Transfer Case: Wide 32P hardened steel gears, eight ball bearings,
cast metal casing, ratio: 1.47:1
Motor: 45 turn crawler
Radio: XR-3 3 channel 2.4GHz, 3rd channel can be used to control an
optional winch (not included)
Steering Servo: Twister metal gear digital with 153oz/in of torque
at 6V, full metal gear drivetrain
Electronic Speed Control: Outcry brushed with built-in drag brake
and separate 6V 5amp turbo BEC, Standard battery connector
Spur Gear: Delrin construction, 64 teeth
Axles: Cast metal with locked differentials
Motor Mount: Billet aluminum
Suspension: G2, double triangulated 4 Link rear suspension,
3 link front suspension with panhard bar
Shocks: Billet aluminum, dual spring 80mm, can be oil-filled
Body: Molded hard plastic, painted mustard yellow, over 70
separate parts including interior, seats, gearshift, handbrake,
dashboard, metal grille insert with lenses for all signal lights,
lights can be illuminated with optional LED light kit, separate
Receiver Box: Plastic fuel cell type
Wheels: Black finish 1.9″ five lug wagon 0.98″ (25mm) wide, 0.43″
(11mm) back spacing
Tires: Super grip Dirt Grabber X3 compound with foam inserts
Bumpers: Front and rear, constructed of machined billet aluminum
Warranty: RC4WD warrants the product to be free from defects when
new. Limited warranty does not cover damages due to normal wear and
tear, user error of assembly or installation, user modifications,
user’s failure to perform routine maintenenace and addition of
aftermarket parts or optional parts.


There are no reviews yet.

Be the first to review “RC4WD Gelande II RTR Truck Kit w/Cruiser Body Set”

Your email address will not be published. Required fields are marked *